Brakes/Levers/Pads

Level T capitalizes on the same trail-taming brake technology that conquered the 2015 World Mountain Bike Championships, to deliver a powerful and consistent XC and trail-optimized brake set that keeps your capital in the bank. This budget-minded, MatchMaker-compatible brake set provides all the power of its siblings, keeping you in complete control.

Caliper only - does not include lever or hose. - Includes steel-backed organic pads

Cyclocross, adventure, or road—whatever your pursuit, the Force 1 HRD brake lever features our HydroR design, with superb ergonomics for better finger wrap. Enjoy seemingly effortless braking regardless of terrain or condition. Features - Lever body design offers improved finger wrap and improved comfort and control - Internals feature easy access to bleed ports - Master cylinder design featuring optimized pistons and seals for power and control - Flat mount caliper - Left-side lever

With comfortable hoods and lightweight aluminum levers, SRAM's 500 Single Speed Brake Levers are the perfect choice for your non-geared bike. Even if you don't run gears, you can still get all the renowned ergonomic, high-level SRAM lever function.

SRAM's left-side Rival 22 Hydraulic Disc Brake and Brake Lever is descended from their top-end RED road group and offer precise braking and shifting performance. The aluminum brake lever and shift paddle deliver smooth modulation and deft shifts while keeping the weight impressively low. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. The forged aluminum disc caliper is optimized to give you the stopping power and modulation you need for road and cyclocross riding. A fully-sealed hydraulic system prevents contamination during muddy cross races and epic dirt-road slugfests. Once you experience the incredible ability of SRAM's Rival 22 Hydraulics, you'll never go back to rim brakes again! - Hydraulic Fluid Type: DOT - Hydraulic Hose Length: 950 mm - Pad Compound: Organic - Rear Der/Shifter Compatibility: SRAM Exact Actuation - Rotor Included: No

- Capable of handling the higher average speeds and increased mass of trail ready E-MTBs. - G2 R lever with a powerful 4-piston caliper derived from the gravity-focused Code brakes.

Level Ultimate is the master of two forces—power and weight—in one sleek, durable design. In this build, we took every gram to task. Carbon-fiber lever blades for crisp, clean pulls. A new two-piece, two-piston caliper for superior heat management and smooth piston actuation. With Ultimate, total control is at your fingertips. - Modern XC power for today's most demanding races - Pivot bearings offer crisp lever feel and a fatigue-free ride - Engineered for easy installation and maintenance

The secret to great fun on any ride is confident and secure braking. Letting it rip where you want, knowing that you can stop when you want. Enter the Apex 1 HYDROR. Using SRAM's proven HYDROR braking system, the Apex 1 delivers quiet confidence on every ride. - Uses DOT 5.1 brake fluid - Lever body design offers excellent finger wrap, comfort, and control - Forged aluminum disc caliper with steel-backed organic pads and steel hardware - Two piston hydraulic caliper - Moto-style means this is a left-side lever with a rear brake, the reverse of the normal American-style. - Front brake hose length is 950mm, rear brake hose length is 1800mm

For the Ultimate, we held nothing back. Our engineers sculpted the finest materials—titanium and carbon fiber—to make this our lightest four-piston brake ever. Power, modulation, and lever feel set a new standard. Personalization is quick and intuitive. And, for performance—well, our test riders didn't dub it the "Mini-Code" for nothing. - More caliper stiffness and a new pad compound with bite - Pivot bearings for crisp lever feel and a fatigue-free ride - SRAM's best power-to-weight ratio in a four-piston brake

- Hayes service parts for calipers - Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap

- Cold-forged 6061-T6 aluminum arms, available in 85mm or 108mm - Precision sealed bearing pivots, titanium and stainless steel hardware - Flexible cable noodle and streamlined cable fixing point - 35 millimeters of vertical brake pad adjustment

Shimano Deore hydraulic disc brakes are a solid setup, offering reliable power and rigid brake design for all riding styles, from XC to trail. The BL-MT500 brake levers deliver high-powered Servo Wave performance for rapid initial pad contact, along with I-spec II compatibility. These are paired with powerful 4-piston MT520 calipers that help boost rider confidence and enjoyment. - Highly responsive braking power for greater control and modulation - Sleek and durable master cylinder design - 4-piston calipers provide a wider pad contact area - Heat insulated pads and pistons

- Attachment parts for Magura OEM and braided-stainless hydraulic disc and rim brake tubing

Stainless steel rotor designed for smooth and quiet braking with any disc brake caliper.

The Dura Type insert pad was originally developed as an aftermarket upgrade for high end Shimano brake systems. The Kool-Stop Dura pads are the same spec as Shimano pads and fit Shimano, SRAM, TRP and Tektro holders with a set screw. Compounds: - Black: Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding. - Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions. - Salmon: Kool-Stop's most famous Salmon compound is also one of the most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Carbon: Kool-Stop's original carbon compound which works great for most carbon wheels but will wear quicker on fast steep descents. - Dual: A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop! Features: - Patented Plow Tip - Water Grooves - Rim Friendly Compounds - Fits 55mm length holders

- Disc brake caliber assembly - Assembled - No hose - Code R B1/RSC A1

- Forged alloy brake levers with reach adjustment - Compatible with linear pull and mechanical disc brakes - Left/Right: Set - Fits 22.2mm (7/8") handlebars

- Designed for linear pull & mechanical disc brakes - Aluminum construction - 2.5 finger - 22.2mm (7/8-inch) clamp - Left/Right: Right - Reach adjust and return spring - 88g each

- Hinged 2 finger lever - Forged alloy construction - 2 piece hinged clamp - Compatible with caliper and U-brake applications - Fits 22.2mm (7/8") handlebars - 166g pair

- Black: all-around performance compound - Salmon (Kool Stop): high grip compound for race/trials use

Replacement lever blades for Magura disc brakes

Disc Brake Adapters

- Shimano's flagship disc brake rotor, now available in ISO 6-Bolt mounting version - Features ICE TECHNOLOGIES FREEZA, a proprietary fabrication technique consisting of a 3-layer aluminum and stainless steel structure and special high heat dissipating treatment allowing for superior cooling and performance - Reduced power fading ensuring consistent high performance even on long downhill stretches - Helps increasing brake pads life and reducing noise

Shimano BL-RS600 Hydraulic Disc Brake Lever For Flat Handlebar. Specifications: - Application: Road, Cyclocross - Type: hydraulic Technical Information: - Lever Length: 3-finger - Adjustment Options: reach adjust (tool) - Mount: clamp (split), I-Spec II - Design: Rear Right, Front Left - Brake Lever Material: aluminium - Lever Body Material: aluminium - Connection: straight Features: - for flat mount brakes - I-Spec II compatible - recommended brake caliper: BR-RS405 - funnel bleeding - lever anodized, master cylinder painted - stainless steel clamp bolt

- Works well as a rear brake where the Neo-Retro may cause heel clearance problems - Compatible with drop bar levers and short pull mountain bike levers - Sealed pivot system with adjustable spring tension and Kool Stop pads - Recommended for standard pull (not linear pull) brake levers - Made in USA

- Lightweight 2-piece alloy cartridge design - Advanced alloy rim braking compound provides superior performance in both dry and wet conditions - Fully integrated angle adjustment - Automatic toe-in alignment - Length of Pad: 70mm - Pad Color: Black - Hardware Color: Black - Post Orientation: Offset

Zipp's Tangente Cork Brake Pads are perfect for Zipp wheels with carbon braking surfaces. They are made of a composite cork polymer for consistent brake response and to reduce glazing from the intense heat caused by braking on carbon. As a result, the Tangente cork pads avoid the brake pulsation produced by residue buildup from rubber pads and can even eliminate pulsation from rims with previous buildup. These pads have a unique shape with more material in the front to improve durability and shed water. Although the composite material wears similarly to low-temperature rubber compounds, the Tangente cork pads last longer than most rubber carbon-specific pads because of the shape and 0.5 mm greater overall thickness.

Jagwire's Mountain Pro Inserts are the correct replacement pads for Jagwire's Mountain Pro brake shoes (sold separately). These pads feature Jagwire's tried-and-true compound for excellent stopping power and durability.

- Entry level to the MAGURA MT world with all of the high-tech features of German engineering skill such as lightweight Carbotecture components and the improved MAGURA disctube for safe stopping on tour and in the city - suitable for mounting left or right

Replacement master cylinder lever assembly for Hayes hydraulic disc brakes.

- Optimum heat dissipation - High durabilty - Wear indicators - 1.95mm thick - Rounded edge - UCI approved

- Optimum Heat dissipation - Reliable performance from Cyclecross to Downhill - High durability, even in the toughest conditions - UCI approved for road competition - Disc Diameter: 160mm - Hub Compatibility: Center Lock - Disc Pad Type: Metal or Resin - Disc Technology: 2-piece design

For use with 2000+ Hayes 74mm eye-to-eye calipers (adapters/calipers for 22mm mounts are no longer available) - (IS) International Standard 51mm tabs; (QR) Quick Release; (TA) thru-axle - Note: Fox-36/40 (thru-axle), Rock Shox Pike (Maxle), and Psylo (Tullio) axle forks use IS-QR adapters

Compatible with caliper and cantilever brakes - Forged aluminum lever and body - Ergonomic 2-finger lever design - Return spring with reach and cable tension adjust - Hinged clamp allows installation without removing grips/tape - Fits 1.5-1.6mm brake cable type - 90g pair

- Suitable for heavy use applications - Excellent in extreme weather conditions - Superior performance at high temperatures - Virtually unaffected by rain or snow - Exceptional pad life - Pad Style ID: 31 - Compatibility: Shimano M8020/M820/M460 / TRP Quandiem - Pad Material: Sintered - Backplate: Steel

- Extra-long molded pads for MTB linear brakes - Black: standard compound designed for dry condition riding - Salmon: aggressive compound for extreme weather conditions - Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

Box One 70mm Carbon Brake Pads were formulated with a special compound compatible with carbon fiber rims. This helps keep the heat down while still creating high-performance stopping power. Paired with our Box One Brake Pad Cartridge Body so you can pull them out of the bike and put them right on the bike! Sold as a pair. Features: - High Performance - Stopping Power Specs: - Material: 6061-T6 Aluminum - Weight: 55 grams

The Box Three Disc Brake Rotor is a Stainless Steel, 6 bolt rotor designed for BMX Race. Utilizing a small size and rounded outside edges for safety is the optimal size for any BMX Race bike. FEATURES: - ISO 6 bolt brake/hub interface - Rounded outside edges - Lightweight Cutouts - High quality stainless steel rotor - High quality locking steel T-25 rotor bolts included

RockShox Brake Post Kit for most RockShox forks. - Includes 2 posts & 2 washers

Pro Extreme Sintered pads feature an aggressive compound that provides maximum stopping power making it perfect for DH riding. The dense, sintered compound also resists water making it extremely effective in wet conditions. - Fit a variety of SRAM and Avid brakes and offer industry leading brake compounds for consistent, confident performance

Pro Extreme Sintered pads feature an aggressive compound that provides maximum stopping power making it perfect for DH riding. The dense, sintered compound also resists water making it extremely effective in wet conditions. - Compatible with Shimano R9170, Metrea U5000, Ultegra R8070, and Road RS305, RS405, RS505 and RS805 - Compatible with Rever MCX1 Flat-Mount and MCX2 Flat-Mount

The Odyssey Springfield brake features a one spring design to make brake installation and set up simple and easy. - For rear use only

Jagwire's Cross Pro Brake Pads use a combination of mountain and road brake-pad technologies for excellent speed control, stopping power and durability so they're ideal for cyclocross use. These brake pads are cartridge style for easy pad replacement without losing your brake shoe adjustment. And there are wheel guides to make wheel installation faster and easier. The Cross Pros are available in threaded or threadless (post-mount) versions to fit most bicycles.

Magura service kits come in a variety of packages to fit your needs.

Odyssey A Brake shoes for all your braking needs.

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts

The Odyssey Medium Monolever is a favorite with its familiar feel, smooth edges and variety of handle options. - Fits 7/8" bars, has a hinged bracket, and does not include cable knarps

The Gost pads feature a unique design to make install and set up easier. - Improved stiffness by built in toe-in into the pad shape and using a solid extruded aluminum frame - Assembly is simplified by lining up the rim and tightening a M6 female bolt

- Suitable for light use applications - Good performance at low temperatures - High-density ceramic organic compound for extended pad life - Low rotor wear - Extremely quiet

• Grooved heat-dissipating back plate design • Durable organic pad compound • Quiet and powerful braking performance for all weather conditions

• Durable organic pad compound • Quiet and powerful braking performance for all weather conditions

Magura replacement lever blades for use with HS33 hydraulic rim brake levers. - Made from durable aluminum casting

Hope 5mm Standard Hose Kit with Fittings for Hope Brake

Keep your disc brakes working great with Jagwire's Mountain Pro Disc Brake Pads. They have a high-performance semi-metallic compound and lightweight aluminum backing plates to keep the weight low, making them perfect for cross-country riding. These are the correct replacement pads for most Formula disc brakes.

Shimano Road brake shoe sets - R55C4 pads - Intended Brake Type: Caliper - Pad Attachment Style: Bolt-In (Caliper) - Rim Compatibility: Standard

- Shimano, SM-RT56 Rotor, 180mm or 160mm, ISO, for resin pads only - Stainless steel rotor

SRAM's CenterLine rotors are light-weight, quiet, smooth and robust, featuring a two-piece design with an aluminum center and steel brake track.

- Includes everything needed to mount hex nut style (non-recessed) caliper brakes - Model: Front

• All weather compound • Cantilever post style • Offset Post • Black • 70mm

•Side pull brake •Includes lever, caliper, cable and housing •Forged aluminum construction